Model: FDK-CD100/H1
Prime Power: 100KW/113KVA
Standby Power: 110KW/125KVA
50Hz/1500rpm/ThreePhase
General Features
The 100KW generator sets are subjected to a comprehensive performance test which includes 50% load, 70% load, 100% load, 110% load and to check, verify that all control systems, alarm and shut-down protection.
Equipped with battery charger and 24V high performance maintenance-free lead-acid starting batteries and connecting cables.
Stainless galvanized zinc plates with strong corrosion-proof.
Vibration isolators between the engine/alternator and base frame.
Equipped with industrial silencer and flexible exhaust hose.
Designed to comply with ISO8528/GB2820.
Powered by Cummins engine and coupled with Stamford alternator.
Water jacket preheater, oil heater and double air cleaner, etc. are available.

Engine Model  6BTA5.9G2
Engine Manufacturer  Cummins (China Dongfeng)
Cylinder quantity 6
Cylinder Arrangement  Not available
Cycle  Not available
Aspiration     Turbo-charge
Bore x Stroke 102×120 (mm x mm)
Displacement  5.9L
Compression Ratio  16.5:1
Prime power / Speed 106/1500 (KW/RPM)
Standby power/ Speed  116/1500 (KW/RPM)  
Speed governor  GAC
Piston Speed  6.0m/s
Friction Energy Output  12.7kw
Total Lubrication System Capacity16.3  (L)
Coolant Capacity 100 (L)  
Fuel Consumption at 100% load 211 at 1500rpm (g/KWh)     
Starter motor  DC24V
Alternator     DC24V
Low idle  750-850rpm

Alternator Specifications
Alternator model  UCI274D
Alternator manufacturer  STAMFORD
Exciter type  Single bearing, Brushless, Self-excited
Rated output prime power  120 KVA
Rated speed  1500 rpm
Rated frequency  50Hz
Number of phase  3
Rated voltage  400V (Available with custom requirements)
Power factor  0.8
Voltage regulation NL-FL  ≤±1%
Insulation grade  H
Protection grade  IP23

Alternator option: Leroy Somer, MECC, Marathon, Engga, Faraday
Control System DSE7320 (DETAILED in INSTRUCTION)
DSE7320 is an advanced control module based on micro-processor, containing all necessary functions for protection of the genset and the breaker control. It can monitor the mains supply, breaker control and automatically start the engine when the mains are abnormal. Accurately measure various operational parameters and display all values and alarms information on the LCD. In addition, the control module can automatically shut down the engine and indicate the engine failure.

Microprocessor control, with high stability and credibility.
Monitoring and measuring operational parameters of the mains supply and genset.
Indicating operation status, fault conditions, all parameters and alarms.
Multiple protections; multiple parameters display, like pressure, temp. etc.
Manual, automatic and remote work mode selectable.
Real time clock for time and date display, overall runtime display, 250 log entries.
Overall power output display.
Integral speed/frequency detecting, telling status of start, rated operation, overspeed etc.
Communication with PC via RS485 OR RS232 interface, using MODBUS protocol.

Soundproof Enclosure Specification
FDK silent 100KW generator is designed by professional acoustic engineers based on years of experience. Now we can make the noise of the generator less than 80-85dB(A) at 1m, or 70-75dB(A) at 7m, 60-65dB(A) at 15m.

Multi-way air intake and exhaust guarantee the power performance of the generator.
Large-scale impedance combined type silencer effectively reduce noise of the generator.
Internal high performance rubber damper and flexible materials reduce vibration.
Base mounted fuel tank supports the generator running for 8 hours.